Microe Mercury II 6000V Bedienungsanleitung PDF herunterladen (Seite 38)

Page 16

PurePrecision

™

Tape Scale Installation

By Applicator Tool

Orienting the Applicator Tool with the

mounting surface reference edge.

Once the tape scale has been inserted in the

Applicator Tool correctly, the Applicator Tool

should be oriented with the mounting surface

reference edge (Sec 6.2.8) in such a way that

the "MicroE Systems" label is on the left and

the white colored end of the tool is on the right.

NOTE:

The following parts of the Applicator Tool

interface with the mounting surface reference edge.

• Guide edge at the bottom, when the edge is of

thickness 0.030 inch.

• Guide surface when edge is of minimum

thickness 0.375 inch.

Guide edge of tool should be in

contact with mounting surface

edge of thickness 0.76mm

(0.030 inches)

Guide surface of tool should be in

contact with mounting surface

reference edge is of minimum

thickness 0.53mm (0.375 inches)

Section B - PurePrecision

™

Tape Scale Installation

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

Keine Kommentare

Microe Mercury II 6000V Bedienungsanleitung Seite 38