Microe Mercury II 6000V Bedienungsanleitung PDF herunterladen (Seite 42)

Page 20

PurePrecision

™

Tape Scale Installation

By Applicator Tool

B6.2.7

At the marked location, place the edge of the tape

scale against the mounting surface reference edge

and press firmly on the end of the tape scale.

Confirm that the following is in contact with the

mounting surface reference edge.

• The guide edge on the bottom of the

applicator tool when reference edge is

0.76mm (0.030 inch) thick.

• The guide surface (rear side) of the

applicator tool when the reference edge

is minimum 9.53 mm (0.375 inch) thick.

Make sure that the end of the tape scale does not

stick to the mounting surface until it is in position

tight against the reference edge.

Section B - PurePrecision

™

Tape Scale Installation

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 66 67

Keine Kommentare

Microe Mercury II 6000V Bedienungsanleitung Seite 42